Search Results

Results for: ODYSSEY

K-Shield Linear Slic Kable

Part #: 14671

CABLE BRAKE ODY LIN SLIC K-SHIELD BU 60x65-1.5mm

K-Shield double braided kevlar housing
Pre-stretched inner wire with Teflon coating
Linear housing prevents cable binding when cable is twisted around during barspin or tailwhip tricks
K-Shield housing provides a higher compressive strength while being lighter than standard stainless steel

Length	Diameter	Material	Color	Style
1650mm	1.5mm	Slic-Kable	Blue	BMX/MTB

Broc Raiford

Part #: 32690

GRIPS ODY MX BROC RAIFORD BK/RD-SWIRL

Broc Raiford signature model
Soft ribbed center with rope detailing on the ends

Color	Length	Style	Search Color
Black/Red Swirl	152mm	Flangeless	Swirl

Evolver II U-Brake

Part #: 120607

BRAKE CLPR ODY EVOLVER II REP CABLE HANGER BK

Genuine Odyssey replacement parts for Evolver II brakes

Color	Model	Part Type
Black	Cable Hanger Only	Misc Small Parts

Broc Raiford

Part #: 310220

GRIPS ODY MX BROC RAIFORD B-RD

Broc Raiford signature model
Soft ribbed center with rope detailing on the ends

Color	Length	Style	Search Color
Red	152mm	Flangeless	Red

Broc Raiford

Part #: 32366

GRIPS ODY MX BROC RAIFORD BK/WH-SWIRL

Broc Raiford signature model
Soft ribbed center with rope detailing on the ends

Color	Length	Style	Search Color
Black/White	152mm	Flangeless	Swirl

Broc Raiford

Part #: 32688

GRIPS ODY MX BROC RAIFORD BK/BU-SWIRL

Broc Raiford signature model
Soft ribbed center with rope detailing on the ends

Color	Length	Style	Search Color
Black/Blue Swirl	152mm	Flangeless	Swirl

Broc Raiford

Part #: 32757

GRIPS ODY MX BROC RAIFORD 160mm O-BU

Broc Raiford signature model
Soft ribbed center with rope detailing on the ends

Color	Length	Style	Search Color
Ocean Blue	160mm	Flangeless	Blue

Evolver 2.5 U-Brake

Part #: 120621

BRAKE CLPR ODY EVOLVER 2.5 REP PARTS KIT

Genuine Odyssey replacement parts for the Evolver 2.5 U-brake

Model	Part Type
Evolver Parts Kit	Misc Small Parts

Clutch Freecoaster Hub Parts

Part #: 370807

HUB RR ODY CLUTCH FREECOASTER GUARD NON DRIVE SIDE PLASTIC

Genuine Odyssey service parts for clutch free coaster hubs

Supplier Part
Non drive side guard - Plastic

Freewheel Remover

Part #: 62103

TOOL F-W REMOVER ODY FOR 13T

Removes Odyssey 13T freewheels

Tool Type
Freewheel Remover

G.L.A.N.D. Guard MK IV

Part #: 370220

HUB FT ODY G-SPORT GLAND GUARD MK IV RR

Grinds Lovely Anti-Nanging Device
Does not effect spacing
Protects hubs and spokes during grinds

Supplier Part	Material	Color	Wt
Rear	Aly	Blk	40g

Hub Guard

Part #: 370823

HUB FT ODY FRONT HUB GUARD f/VANDERO PRO/ROLOWAY

Odyssey front hub gaurd for Vandero, Pro, and Roloway hubs
Protects hub and spokes from damage from impact and during grinds
Press fit design snaps onto hub collar

Supplier Part	Color
W-452F-01	Blk

G.L.A.N.D. Guard MK V

Part #: 371572

HUB FT ODY G-SPORT GLAND GUARD MK V RR BK

The latest iteration of G-Sport`s G.L.A.N.D. Guard offers more coverage and bolts in place
The MK V has been further improved for ease of use and durability
Does not effect spacing
Protects spokes and hub during grinds

Use	Color
Front	Blk

Antigram Rear Hub Parts

Part #: 370726

HUB RR ODY ANTIGRAM COLLAR DRIVE SIDE

Replacement parts for Odyssey Antigram rear hubs

Use
Drive side collar

Clutch Freecoaster Hub Parts

Part #: 370729

HUB RR ODY CLUTCH FREECOASTER COLLAR NON DRIVE SIDE

Genuine Odyssey service parts for clutch free coaster hubs

Supplier Part
Non drive side collar

Twombolt - Thunderbolt

Part #: 210075

CRANKARM ODY TWOMBOLT REP SPINDLE BOLT

Replacement parts for Odyssey`s Twombolt or Thunderbolt cranks

Type
Spindle Bolt

Air Supply Inner Tube

Part #: 63819

TUBE ODY AIR SUPPLY 24x1.90-2.2 SV

Specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price
Due to high quality rubber, and strict quality control, Air Supply tubes are engineered to retain air longer and better than standard tubes

Size	Valve Type	Valve Length	ISO
24x1.90-2.20	SV	32mm	507

Joyride

Part #: 914338

AXLE PEG ODY JOYSTICK 4.5in REP SLEVE BK

Replacement sleeves for the updated version of the popular Joystick pegs
New longer 4.5" length

Axle	Length	Sold As
Sleeve Only	4.5"	Individual

Air Supply Inner Tube

Part #: 63818

TUBE ODY AIR SUPPLY 16x1.75-2.125 SV

Specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price
Due to high quality rubber, and strict quality control, Air Supply tubes are engineered to retain air longer and better than standard tubes

Size	Valve Type	Valve Length	ISO
16x1.75-2.125	SV	32mm	305

Gyro G3 Cables

Part #: 14875

CABLE ROTOR ODY GYRO 3 CBL UP WH LG475mm

Super slick PTFE coated inner wire and Teflon lined, braided housing.
Cable friction virtually eliminated
Compatible with most cable detanglers

Use	Length	Diameter	Color
LG Upper	475mm	1.5mm	White

Slim by Four

Part #: 12599

BRAKE SHOES ODY SLIM x4 SOFT CLEAR

BMX specific design
Symmetric shape for both forwards and backwards braking
Custom inner frame stiffens pad to eliminate power lost to flex

Quantity	Length of Pad	Compound	Pad Color	Post Orientation
1 Pair	60mm	Soft	Clear (Soft)	Centered

Ghost Pads

Part #: 12362

BRAKE SHOES ODY GHOST PADS NORM BLK

BMX design
Simple & quick installation
Integrated toe-in shape eliminates the need for conical washers
Low profile M6 bolt hardware
Extruded aluminum inner frame for increased rigidity

Quantity	Length of Pad	Compound	Pad Color	Post Orientation
1 Pair	22mm	Standard	Black	Centered

Gyro G3 Cables

Part #: 14218

CABLE ROTOR ODY GYRO 3 CBL UP BK LG460mm

Super slick PTFE coated inner wire and Teflon lined, braided housing.
Cable friction virtually eliminated
Compatible with most cable detanglers

Use	Length	Diameter	Color
LG Upper	460mm	1.5mm	Black

Gyro G3 Cables

Part #: 14220

CABLE ROTOR ODY GYRO 3 CBL UP BK SM390mm

Super slick PTFE coated inner wire and Teflon lined, braided housing.
Cable friction virtually eliminated
Compatible with most cable detanglers

Use	Length	Diameter	Color
Sm Upper	390mm	1.5mm	Black

Gyro G3 Cables

Part #: 14217

CABLE ROTOR ODY GYRO 3 CBL LOWER BK UNIV

Super slick PTFE coated inner wire and Teflon lined, braided housing.
Cable friction virtually eliminated
Compatible with most cable detanglers

Use	Length	Diameter	Color
Lower	390mm	1.5mm	Black

Gyro G3 Cables

Part #: 14219

CABLE ROTOR ODY GYRO 3 CBL UP BK MD425mm

Super slick PTFE coated inner wire and Teflon lined, braided housing.
Cable friction virtually eliminated
Compatible with most cable detanglers

Use	Length	Diameter	Color
MD Upper	425mm	1.5mm	Black

G-Bolts

Part #: 370826

HUB AXLE BOLT ODY G-BOLT 3/8 17/6mm PR

Heat-treated chromoly inbound axle bolts with 17mm wrench flats and a 6mm hex slot
Intended for use with Odyssey/GSport hubs

Size	Material	Color
3/8"	Chromoly	Blk

Gyro G3 Cables

Part #: 14871

CABLE ROTOR ODY GYRO 3 CBL LOWER WH UNIV

Super slick PTFE coated inner wire and Teflon lined, braided housing.
Cable friction virtually eliminated
Compatible with most cable detanglers

Use	Length	Diameter	Color
Lower	390mm	1.5mm	White

Ghost Pads

Part #: 12363

BRAKE SHOES ODY GHOST PADS SOFT CLR

BMX design
Simple & quick installation
Integrated toe-in shape eliminates the need for conical washers
Low profile M6 bolt hardware
Extruded aluminum inner frame for increased rigidity

Quantity	Length of Pad	Compound	Pad Color	Post Orientation
1 Pair	22mm	Soft	Clear	Centered

Slim by Four

Part #: 12390

BRAKE SHOES ODY SLIM

BMX specific design
Symmetric shape for both forwards and backwards braking
Custom inner frame stiffens pad to eliminate power lost to flex

Quantity	Length of Pad	Compound	Pad Color	Post Orientation
1 Pair	60mm	Standard	Black (Normal)	Centered

Air Supply Inner Tube

Part #: 63816

TUBE ODY AIR SUPPLY 20x2.1-2.45 SV

Specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price
Due to high quality rubber, and strict quality control, Air Supply tubes are engineered to retain air longer and better than standard tubes

Size	Valve Type	Valve Length	ISO
20x2.10-2.45	SV	32mm	406

Air Supply Inner Tube

Part #: 63817

TUBE ODY AIR SUPPLY 18x1.75-2.125 SV

Specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price
Due to high quality rubber, and strict quality control, Air Supply tubes are engineered to retain air longer and better than standard tubes

Size	Valve Type	Valve Length	ISO
18x1.75-2.125	SV	32mm	355

Graduate PC

Part #: 913855

AXLE PEG ODY GRADUATE PC 5x1.50in REP SLEVE BK

Replacement sleeves for Odyssey Graduate PC pegs
Sleeve only - peg not included

Axle	Color	Diameter	Material	Length	Sold As
Replacement Sleeve only	Black	1.5"	Plastic	5"	Individual

Calibur V2 Spindle Bolt

Part #: 211765

CRANKARM ODY CALIBUR V2 REP SPINDLE BOLTPAIR

Replacement spindle bolt for Odyssey Calibur V2 cranksets
Sold individually

Type	Color
Spindle Bolt	BLK

Clutch Freecoaster Hub Parts

Part #: 370818

HUB RR ODY CLUTCH V2 SLACK ADJUST HOLE COVER SL

Genuine Odyssey service parts for clutch free coaster hubs

Supplier Part
Slack adjustment cover

Graduate PC

Part #: 912306

AXLE PEG ODY GRADUATE PC 4.75x1.50in REP SLEVE BK

Replacement sleeves for Odyssey Graduate PC pegs
Sleeve only - peg not included

Axle	Color	Diameter	Material	Length	Sold As
Replacement Sleeve only	Black	1.5"	Plastic	4.75"	Individual

M2 Monolever Cables

Part #: 14755

CABLE BRAKE ODY M2 MONOLEVER DUAL UPPER 440mm BK

For use with Odyssey M2 monolevers

Length	Color
440mm	Black

Twombolt - Thunderbolt

Part #: 211277

CRANKARM ODY TWOMBOLT REP SPROCKET BOLT

Replacement parts for Odyssey`s Twombolt or Thunderbolt cranks

Type
Sprocket Bolt

A-Brake Pads

Part #: 13546

BRAKE SHOES ODY A-BRAKE BK

Fits all linear pull brakes
Slightly curved to match curve of rim

Quantity	Length of Pad	Compound	Pad Color	Post Orientation
1 Pair	70mm	Standard	Black	Offset

A-Brake Pads

Part #: 12772

BRAKE SHOES ODY A-BRAKE CLR SOFT

Fits all linear pull brakes
Slightly curved to match curve of rim

Quantity	Length of Pad	Compound	Pad Color	Post Orientation
1 Pair	70mm	Soft	Clear	Offset

Antigram Front Hubs

Part #: 370043

HUB FT ODY ANTIGRAM COLLAR STL

Replacement parts for Odyssey Antigram front hubs

Use
Steel collar

High Pressure Rim-Strips

Part #: 63546

RIM STRIP ODY HP 20in RD PAIR

High pressure rim strips

Size	Width	Color	Brand	Quantity	Material
20"	30mm	Red	Odyssey	Pair	PVC

Stem Bolt

Part #: 58951

STEM BOLT ODY SET OF 6

Replacement stem bolts for Odyssey stems
May fit other BMX stems
Set of 6

Color
Black

High Pressure Rim-Strips

Part #: 630017

RIM STRIP ODY HP 24in RD PAIR

High pressure rim strips

Size	Width	Color	Brand	Quantity	Material
24"	30mm	Red	Odyssey	Pair	PVC

Par End Plugs

Part #: 31633

HBAR PLUG ODY PLASTIC BLK PR

Durable plastic bar ends
For .049 and .065 bars only
Simple, light, strong

Color	Style	Search Color
Black	Locking	Black

Slic-Kable

Part #: 14129

CABLE BRAKE ODY SLIC-KABLE 1.8mm BLK

Prestretched inner wire, Teflon liner, and tight coil housing
K-Shield housing provides a higher compressive strength while being lighter than standard stainless steel
Includes gyro lug at one end for use as a bottom detangler cable when using a London Mod or similar setup
Well packaged for POP display
Fits BMX or MTB

Length	Diameter	Material	Color	Style
1650mm	1.8mm	Slic Kable	Black	BMX/MTB

Slic-Kable

Part #: 14090

CABLE BRAKE ODY SLIC-KABLE 1.5mm BLK

Prestretched inner wire, Teflon liner, and tight coil housing
K-Shield housing provides a higher compressive strength while being lighter than standard stainless steel
Includes gyro lug at one end for use as a bottom detangler cable when using a London Mod or similar setup
Well packaged for POP display
Fits BMX or MTB

Length	Diameter	Material	Color	Style
1650mm	1.5mm	Slic Kable	Black	BMX/MTB

Slic-Kable

Part #: 14243

CABLE BRAKE ODY SLIC-KABLE 1.5 RED

Prestretched inner wire, Teflon liner, and tight coil housing
K-Shield housing provides a higher compressive strength while being lighter than standard stainless steel
Includes gyro lug at one end for use as a bottom detangler cable when using a London Mod or similar setup
Well packaged for POP display
Fits BMX or MTB

Length	Diameter	Material	Color	Style
1650mm	1.5mm	Slic Kable	Red	BMX/MTB

Slic-Kable

Part #: 14436

CABLE BRAKE ODY SLIC-KABLE 1.5 BLU

Prestretched inner wire, Teflon liner, and tight coil housing
K-Shield housing provides a higher compressive strength while being lighter than standard stainless steel
Includes gyro lug at one end for use as a bottom detangler cable when using a London Mod or similar setup
Well packaged for POP display
Fits BMX or MTB

Length	Diameter	Material	Color	Style
1650mm	1.5mm	Slic Kable	Blue	BMX/MTB

Slic-Kable

Part #: 14437

CABLE BRAKE ODY SLIC-KABLE 1.5 WHT

Prestretched inner wire, Teflon liner, and tight coil housing
K-Shield housing provides a higher compressive strength while being lighter than standard stainless steel
Includes gyro lug at one end for use as a bottom detangler cable when using a London Mod or similar setup
Well packaged for POP display
Fits BMX or MTB

Length	Diameter	Material	Color	Style
1650mm	1.5mm	Slic Kable	White	BMX/MTB

Displaying 251 to 300 (of 308 products)